BILANMATIC - 7500

A New Generation Vehicle Inspection Center



BILANMATIC 7500
  • Single Line
  • Single Operator
  • Multi vehicles

    BILANMATIC'S Flexibility allows any type of inspection. From simply one bench like brake tester or suspension tester to the security inspection which includes, suspension, side slip and turn angles testing, and even to in depth inspection by adding front toe, engine analyzer speedometer, and so on..

    BILANMATIC From MULLER BEM centralizes all measurements made for the vehicles (side slip , Suspension, brake ,turn angle , etc. ) and compares them with the standard specifications , it can then : Either print on a specially designed from the results with the informations contained in the vehicles ownership documents and the comments. good , average or poor or transmit such information to the station management computer for editing and or memorizing and /or computing of statistic in addition to invoicing , accounting and other management functions.

    BILANMATIC is extremely simple and flexible to use, thanks to the constant dialogue with the colour VDU screen through the exclusive RCB which identifies the vehicle during all the tests procedures whether or not the predeterminated sequence is followed. The Operators drive from one bench to the other and never have to leave the vehicle even during the recording of measurements. each operator selects from the screen "MENU" a programm and then follows the sequence unless the decides to do otherwise which is always possible.

    BILANMATIC From MULLER BEM is totally modular concept allowing a new center to start with a basic single inspection line but leaving open its evolution into a multiline inspection center to keep abreast of future needs and innovation without loosing the initial investment. MULLER BEM offers you now the testing center of the 21st Century.

    BILANMATIC is modular and could include the following :
  • One or several benches of every type (Brake tester , suspension tester , side slip tester.....), and 3 other units.
  • One or several infra-red Remote Control Boxes (RCB).
  • One central processing unit interconnected to colour VDU screens and to benches.
  • One main keyboard desk.
  • One Printer.

    When a vehicle arrives in a station equipped with Bilanmatic , an operator grants it once RCB selected among those available and through the main keyboard informs the central unit identifying the RCB with the vehicles : make model , type registration , ownership documents , etc. The RCB will then correspond to one precise vehicle and one only all along the inspection.

    Then with the help of this RCB , the operator can do all the required tests driving from on bench to the other according to a preprogrammed schedule or according to the situation in the center. For each test , a Colour VDU Screen will Offer a Selection of Coded operations which can be selected by pressings the corresponding key on the RCB and by doing so other operator not only starts the testing sequence but also informs the central unit that such test is for such vehicles.

    The central unit can record and compute informations sent by test bench keeping them in the file of the specific vehicle . when every test has been completed , the central unit can issue a report and the RCB can be allocated to another vehicle.